Quick Release

Der Vertrieb in Öster­reich erfolgt exklusiv über…

Fa. Werner Bartolot in Hermagor
E-Mail: office@bartolot.at
www.jagdwaffe.at

Fa. Enengl Ges.m.b.H. in Zwettl, N.Ö.
E-Mail: waffen.enengl@wvnet.at
www.enengl.at

Devel­oped for the Active Hunt

A silencer’s most impor­tant require­ment, when used for hunting, is a suppres­sion of the muzzle blast as effec­tive as possible, thus protecting the hearing of man and dog.

We devel­oped our ERA®SILENCER with the objec­tive to achieve an optimal suppres­sion while offering a compact and light-weight design, full Magnum compli­ance and a long service life.

All suppres­sors of the SOB series feature an over-barrel design, meaning one part of the silencer extends back­wards from the muzzle and around the barrel. This reduces the net length, yet allows for very good suppres­sion values. In addi­tion, the first round pop common in other silencers has been reduced to an absolute minimum. Recoil and muzzle flash are consid­er­ably decreased as well.

Our ERA®SILENCERs are easily disas­sem­bled. The threaded bushing is exchange­able, hence facil­i­tating the suppressor‘s usage with other rifles of the same caliber, but with a different muzzle thread.

The supplied barrel bushing attaches to the breech end of the over-barrel silencer. This bushing protects the silencer in general and the muzzle thread from lateral forces in partic­ular, and prevents the ingress of dirt and snow.

The surface struc­ture guar­an­tees signif­i­cantly less powder residue adhering to the silencer’s inte­rior. Trans­verse grooves milled on the outer tube offer suffi­cient grip for the instal­la­tion and removal while also helping the silencer cool down faster.

The step-like design protects the seals during disas­sembly so they will not be exposed to any powder residue in the outer tube. The surface coating acc. to MIL-SPEC MIL-A-8625F Type III meets the highest require­ments on hard­ness and corro­sion resis­tance.

Offering numerous advan­tages, our ERA®SILENCERs are excel­lently equipped for the everyday hunting use for a long time.

A Dozen Reasons for ERA®SILENCER

A Dozen Reasons for ERA®SILENCER

High Suppres­sion
Up to 32 dB (Caliber .308 Win.)*

Short Net Length
Up to 326g (SOB 3D incl. ERA®LOC)

Short Net Length due to Over-Barrel Design
The firearm’s balance and handling char­ac­ter­is­tics are affected less.

Surface Coating acc. to MIL-SPEC
Meets the highest require­ments on hard­ness and corro­sion resis­tance.

Minor Muzzle Flash
The muzzle flash is almost completely redi­rected into the silencer’s inte­rior, thus substan­tially reducing the glare affecting the shooter.

Reduced Recoil
The great number of baffles consid­er­ably reduces the recoil.

MAGNUM Compli­ance
High-grade aluminum alloys and a solid wall thick­ness allow the use of Magnum calibers.

Step Geom­etry - Dimin­ished Wear of Seals
The step-like design of the ERA®SILENCERs elim­i­nates damage to the seals.

Mini­mized First Round Pop
The silencer’s custom-built baffle compo­nent reduces the first round pop to a minimum.

Exchange­able Threaded Bushing
An exchange­able threaded bushing facil­i­tates the ERA silencer’s use on various rifles of the same caliber with different muzzle threads.

ERA®LOC Quick Release
All ERA®SILENCERs are avail­able with optional ERA®LOC quick release.

Suited for Shooting Gallery
Our new ERA®SILENCER SOB 2S features a baffle compo­nent made from stain­less steel and is suited for shooting galleries.

*Deter­mined by DEVA

Good to Know:

The stated suppres­sion values were deter­mined in caliber .308 Win. through inde­pen­dent test series acc. to MIL-STD 1474D conducted by DEVA (German Research Center for Hunting and Sporting Arms). This method has the measuring micro­phone set up at a distance of 1 meter and 90° to the left of the muzzle.

It is essen­tial to note the following:

The ERA®SILENCERs are designed for hunting use in the field. They are not intended to be utilized for close succes­sion shooting series, like e.g. in a shooting gallery. After a series of 10 shots maximum, the suppressor needs to cool down enough so it can be touched with bare hands. Dies gilt nicht für unseren neuen Hybrid-Schalldämpfer SOB 2S.

Good to Know:

The stated suppres­sion values were deter­mined in caliber .308 Win. through inde­pen­dent test series acc. to MIL-STD 1474D conducted by DEVA (German Research Center for Hunting and Sporting Arms). This method has the measuring micro­phone set up at a distance of 1 meter and 90° to the left of the muzzle.

It is essen­tial to note the following:

The ERA®SILENCERs are designed for hunting use in the field. They are not intended to be utilized for close succes­sion shooting series, like e.g. in a shooting gallery. After a series of 10 shots maximum, the suppressor needs to cool down enough so it can be touched with bare hands. Dies gilt nicht für unseren neuen Hybrid-Schalldämpfer SOB 2S.